Advertising Feather Flags

Advertising Feather Flags


custom flags   trade show table covers   Custom Tents   Beach Flags

feather flags   feather flags

 

wool blended fabric .  of wool fabric, wool fabric  Advertising Feather Flags share some of the larger proportion. Which is a wool / polyester and wool / cotton blend fabric .

 

Wool / polyester blend fabrics, fastness acid dyes and disperse dyes to match .  of wool / cotton blended fabric, the use of reactive dyes, vat dyes under alkaline conditions. Standard Flag Size These two kinds of blended fabrics before  should be subject to chlorination, so that the color yield of the fabric, color uniformity and color fastness to achieve the best level. Advertising Feather Flags

 

7 Velveteen printed.

 

The velveteen Diamond . Diamond printed velveteen on  using screen  characteristics, availability of a special flash effects, the light of natural diamonds in the sunlight can be issued.

 

Diamond  paste composed of:

 

Diamond  paste S-10%

 

Diamond  paste 60% of

 

Fixing agent M 10% Advertising Feather Flags

 

Catalyst U-20% Sizes Of Flags

 

Paint colorant (need to be added or not added)

 

Diamond  process:

 

Dry  baking (165 ° C for 3 minutes or 180 ° C for 1 minute)

 

Higher solid content in the diamond  paste, suitable for cold Taiwan plate , in order to avoid clogging of the mesh, the general 80-purpose network is appropriate.

 

to velveteen . Velveteen printed products can be used as a cloth, a set of decorative fabrics, wall, etc.. The velveteen  bright color, realistic shape, and a strong sense of three-dimensional look gorgeous and noble, often gives a beauty to enjoy.

 

a. The velveteen  process. Nylon Flag Wholesale

 

Original billet – turn cloth sew the head – desizing, scouring, bleaching – white – drying – base cloth     post-processing Advertising Feather Flags

 

Because velveteen is a positive and negative, inverted wool fabrics, in the process must always pay attention to smooth hair processing, fluff the down conveyor head a force can not be too large, the general slack width processing. The pre-treatment in the dye vat.

 

and b. The velveteen  plate-making process. Velveteen printed version of polyvinyl alcohol a perchlorethylene plate. Used vinyl chloride instead of lacquer for a reinforcement agent, can greatly shorten the platemaking cycle, so called "rapid plate method.

 

Plate of the process: Custom Nylon Flags

 

Screen frame to prepare the acetal plastic on stretching alkaline washing drying paste outside> network selection

 

Drying , a vinyl chloride resin on the outside sensitive adhesive drying Paint polyvinyl alcohol Advertising Feather Flags darkroom drying Black and white is issued photosensitive washing drying Nylon Flags wipe flowers Check Repair proofing stand

 

Feather Flags Feather Flags Wholesale Custom Feather Flags


Feather Flag & Pole & Spike & Base: As low as $49.00 to $59.00 !
Custom 3x5 Flags: As low as $6.00 to $13.50 !
Hand Flags: As low as $0.50 to $1.50 !
Car Flags: As low as $1.00 to $3.00 !
  All pricing based on quantity desired.
 
Unlimited Colors & No Set-up Fee's!

Minimum Order: 1

 custom printed flags
 
  • Color:  Any colors are available, Unlimited Colors & No Set-up Fee's!

  • Logo:  Any logos are available

  • Flags Material:   Knitted material / 100% Polyester / Nylon / Cotton / Satin and etc

  • Flagpole Material:  Aluminium alloy / Fiberglass / Wooden / Plastic

  • Normal Flag Size:   2'x3', 3'x5', 4'x6', 5'x8' and can be customized.
  • Hand Flag Size:  5"x8",  8"x12", 12"x18" and can be customized.
  • Car Flag Size:  8"x12", 12"x18" and can be customized.
  • Feather Flag/Teardrop Flag size:
  • S, pole total height is 8.5ft, after setting up, it is about 7ft.  (flag size: about  5.8'x1.3' ) 
    M, pole total height is 11 ft, after setting up, it is about 9.2ft. (flag size: about 7.9'x2.0' )
    L, pole total height is 15.1ft, after setting up, it is about 13ft.  (flag size: about 11.2'x2.3' )
    XL, pole total height is 18.4ft, after setting up, it is about 16ft. (flag size: about 13.5'x2.6' )


  • Delivery Time:    small order – 1 to 2 days, big order – 10 to 15 days

  • Shipping Time:  1 to 2 days to North America, Europe.
  •                                           2 to 3 days to Australia, New Zealand.
  •                                           3 to 5 days to other countries.

Tags: