Advertising Flags For Sale, Advertising Flags
Figure 2-31 tension force on the screen frame (local) 2 for prestressed processing. Stretching tension stability of the bending deformation of the screen frame will have an impact due to prestressing processing in order to reduce this impact, the screen frame.
Handled in two ways: First, according to the principle of the strength of the arch, the network box produced as Figure 2-32 left convex deflection of about 4mm / m, each interior angle is slightly greater than 90 °; or made of metal frame, with a special tool to stretch into this shape, such pre-deformation processing can resist the influence of tension. Another method is to pre-should be dealt with at the same time do a pneumatic pull the net to do, pull the net's front-end tight withstand the framework of four weeks lateral, multi-box by the top edge the role of bending (Figure 2 32 right), and when fixed-line, the screen frame by bearing surface by the lateral move to the above, Custom Flags
but under the direction of the force and size is basically the same, therefore no further increase in bending. Due to these advantages, pneumatic stretching machine at home and abroad the most popular form of stretching equipment. Advertising Flags For Sale Figure 2-32 Network box prestressed (3) sturdy and durable.
Network box is in use should always contact with water, solvent, and are subject to changes in temperature. By those outside the solid impact of the screen frame, durable, does not occur and whether the oblique phenomenon, and to ensure the reuse of network box in order to reduce waste, reduce costs. 4 is easy to operate. Conditions ensuring the strength, the net box as we choose light weight, easy to operate and use. Flag Maker Online
Adhesion. Screen frame and the bonding surface to have a certain roughness, Advertising Flags in order to enhance the adhesion and network box. (6) the right size. Advertising Flags For Sale To configure the production of different specifications of network box, when used according to the size of the size to determine the appropriate network box, you can reduce waste, and ease of operation. Network box size than the printed version of the graphic part of the bigger, so easier to not only the size of the product is also accurate, the ink through the amount of accuracy will improve. For example, the printed version of the pattern size is a × b, the inside of the box to full size 2a × 2b . Frame size selection is mainly based on the area, the factors to consider are: ink board when the back to the ink plate to start and end parts of the needs; version accumulation of ink needs; to ensure that the tension of the printed version of the film parts of the uniform requirements; The plates need to rebound in ink board trip. Usually network box to box face 1m2 of the majority, Advertising Flags greater than 1m2 of as large screen frame. The large screen frame is generally made of wood, but the tension its exposure is often not ideal and easy to absorb deformation, it is now beginning to be aluminum alternative. To address to the smaller cross-sectional area profiles make the problem of insufficient strength of large-scale network box on the market today reinforced aluminum extrusions, Promotional Flags
the cross-sectional shape as shown in Figure 2 30. The profiles for the production of large screen frame with lightweight, high strength, no deformation.
Feather Flag & Pole & Spike & Base: As low as $49.00 to $59.00 !
Custom 3x5 Flags: As low as $6.00 to $13.50 !
Hand Flags: As low as $0.50 to $1.50 !
Car Flags: As low as $1.00 to $3.00 !
All pricing based on quantity desired.
Unlimited Colors & No Set-up Fee's!
Minimum Order: 1
- Color: Any colors are available, Unlimited Colors & No Set-up Fee's!
- Logo: Any logos are available
- Flags Material: Knitted material / 100% Polyester / Nylon / Cotton / Satin and etc
- Flagpole Material: Aluminium alloy / Fiberglass / Wooden / Plastic
- Normal Flag Size: 2'x3', 3'x5', 4'x6', 5'x8' and can be customized.
- Hand Flag Size: 5"x8", 8"x12", 12"x18" and can be customized.
- Car Flag Size: 8"x12", 12"x18" and can be customized.
- Feather Flag/Teardrop Flag size:
- S, pole total height is 8.5ft, after setting up, it is about 7ft. (flag size: about 5.8'x1.3' )
M, pole total height is 11 ft, after setting up, it is about 9.2ft. (flag size: about 7.9'x2.0' )
L, pole total height is 15.1ft, after setting up, it is about 13ft. (flag size: about 11.2'x2.3' )
XL, pole total height is 18.4ft, after setting up, it is about 16ft. (flag size: about 13.5'x2.6' )
- Delivery Time: small order – 1 to 2 days, big order – 10 to 15 days
- Shipping Time: 1 to 2 days to North America, Europe.
- 2 to 3 days to Australia, New Zealand.
- 3 to 5 days to other countries.