Backpack Flag Banner

Backpack Flag Banner


custom flags   trade show table covers   Custom Tents   Beach Flags

Backpack BannerBackpack Banner

backpack flagsbackpack flags

 

and b. Foam , dry (or low temperature drying) is very important. Backpack Flag Banner Small area of ​​fabric can be stacked multi-layer drying rack, a large area of ​​free rope hang dry naturally. To ensure that the silk screen effect, silk screen fabric should not be subject to a high temperature curing and low temperature (not more than 70 ) or dried at room temperature ventilation as well. The device dry without heating (in winter can be properly heated), (room temperature) is forced through China can be. Backpack Flag Banner

 

(c) The key process of the foam  is "hot hot". Hot pressing iron machine consists of two parts of the electric heating platform and contact platform, you can adjust the temperature and time. The main technical parameters: temperature range 50-300 ° C (manual), controlled range of 0 to 60 seconds (manual) Pressing area of ​​26 × 38cm, the operating voltage of 100/110V power 1kw. Pressing of the large area can be used to complete the preparation countertops, heating machine, pressurized cylinder, conveyor belts, discharging cooling countertops, Backpack Flag Banner and withstand units, controllers and other components of the semi-automatic hot pressing iron machine. The foam can be used hair dryer to solve.

 

fabric foam  process.

 

a. Fabric foam  process is as follows:

 

Designs, drawings, system backplanes – proofing Stretching coated with photosensitive plastic – transfer ink – (fabric dyeing and finishing processing, cutting, low-temperature drying of ) foam screen  foam (hot hot) – test – sewing finished

 

(b) conditions: Backpack Flag Banner

 

Head: 80 ~ 120 mesh.

 

Low-temperature drying temperature: after the end of the foam , usually at room temperature using ventilation (25 ° C), 3 to 4 hours, fabric dry. If baking, the temperature should be below 70 .

 

Hot pressing perm bubble temperature: 115 ~ 125 ° C, visible foam slurry composition and pressure of hot contact surface and appropriate change.

 

Hot pressing to perm bubble: different fabrics, different designs and different foam requirements to control time of 15 seconds.

 

The hot pressing iron contact surface: heating platen is usually direct contact with the reverse side of the fabric, so that is conducive to foam hair soft, high-fat. Backpack Flag Banner

 

Hot hot pressing pressure near atmospheric pressure.

 

Cooling time: the foam can be fully, without regard to the cooling time.

 

Affect the quality factors of fabric foam . Fabric foam  to achieve both good art appreciation effect, have high practical value, in addition to the design level, the factor is the wide range of operating experience and skill factors, but also have a variety of raw materials and the quality factor .

 


Feather Flag & Pole & Spike & Base: As low as $49.00 to $59.00 !
Custom 3x5 Flags: As low as $6.00 to $13.50 !
Hand Flags: As low as $0.50 to $1.50 !
Car Flags: As low as $1.00 to $3.00 !
  All pricing based on quantity desired.
 
Unlimited Colors & No Set-up Fee's!

Minimum Order: 1

 custom printed flags
 
  • Color:  Any colors are available, Unlimited Colors & No Set-up Fee's!

  • Logo:  Any logos are available

  • Flags Material:   Knitted material / 100% Polyester / Nylon / Cotton / Satin and etc

  • Flagpole Material:  Aluminium alloy / Fiberglass / Wooden / Plastic

  • Normal Flag Size:   2'x3', 3'x5', 4'x6', 5'x8' and can be customized.
  • Hand Flag Size:  5"x8",  8"x12", 12"x18" and can be customized.
  • Car Flag Size:  8"x12", 12"x18" and can be customized.
  • Feather Flag/Teardrop Flag size:
  • S, pole total height is 8.5ft, after setting up, it is about 7ft.  (flag size: about  5.8'x1.3' ) 
    M, pole total height is 11 ft, after setting up, it is about 9.2ft. (flag size: about 7.9'x2.0' )
    L, pole total height is 15.1ft, after setting up, it is about 13ft.  (flag size: about 11.2'x2.3' )
    XL, pole total height is 18.4ft, after setting up, it is about 16ft. (flag size: about 13.5'x2.6' )


  • Delivery Time:    small order – 1 to 2 days, big order – 10 to 15 days

  • Shipping Time:  1 to 2 days to North America, Europe.
  •                                           2 to 3 days to Australia, New Zealand.
  •                                           3 to 5 days to other countries.

Tags: