Best Flag Quotes, Flag Quotes

Best Flag Quotes, Flag Quotes


custom flags   trade show table covers   Custom Tents   Beach Flags

best flag quotes   best flag quotes

flag quotes   flag quotes

Fifth, the performance requirements of Best Flag Quotes The plate, the of technology on the performance of the following a few basic requirements. (1) tensile strength. Means by tension, tensile strength, resistance to undermine the ability of the (fracture). Tensile strength, resistance to stretching, can be high-tension screen. The tension in units of N / cm. In addition, the moisture after the intensity should be small. (2) elongation at break. Elongation tension fracture elongation and the ratio of the original length, expressed as a percentage. Elongation, plane stability is poor, but screen also requires a certain tension (3% elongation) with sufficient flexibility. Therefore, the elongation can not be zero, but small is good. High tension, low elongation (elastic) modulus, which is essential to guarantee the of accuracy. Best Flag Quotes Figure 2-16 Several tensile elongation curve (horizontal elongation,%; longitudinal coordinates tension, N / cm.) 1 – stainless steel wire mesh – nickel-plated polyester mesh 3 – nickel foil Network 4 – new polyester mesh 5 – polyester mesh – nylon mesh 3 good elasticity. Resilience refers to the stretch to a certain length (eg, elongation of 3%) after release to the external force, the response capacity of its length, also known as the elongation recovery degree expressed as a percentage. Its value is bigger and better. Rebound after the sharp edges, imprinted. (4) the stability of the temperature and humidity changes. Softening point, Best Flag Quotes and to adapt to the thermal material silk screen requirements; moisture absorption rate is small, plate quality to stabilize. 5 ink performance. 6 Resist chemicals. The process of plate and the case of acids, alkalis and organic solvents, this should be enough Resist. In summary, the most critical performance is the high-tension, low elongation. Figure 2-16 help us evaluate the various features. Performance comparison Nylon, polyester in a variety of performance are better than silk, so we generally use in the production of these two. The two are compared, nylon resilience through ink, electrostatic, it is applied to clear-cut pretty products, the drawback is the acid resistance slightly larger elongation is not suitable for high precision products. Polyester chemical resistance superior to nylon, low elongation, is an ideal material for precision image plates, but the poor elasticity, suitable for high-precision . In addition, modern plastic ink multi-solvent inks, in the of plastic products should be preferred excellent solvent resistance of polyester. The downside is that the is easy to produce static electricity, compared with nylon, abrasion resistance, and photosensitive materials, glue, ink and recovery speed somewhat less. Polyester abrasion resistance, a combination of light-sensitive film, through the ink, resilient are better than nylon, especially in the is easy to produce static electricity, causing the ink "drawing". Size less precision monochrome screen should be selected nylon, polyester during multicolor overprint precision should be chosen. Small stretch of stainless steel, high strength, through the ink, the dimensional accuracy and stability. Apply to circuit boards and integrated circuits, high-precision image . Inadequacies is done, restitution, poor flexibility, and expensive. Variety of performance listed in Table 2-16, for readers in the selection of reference. VII How to choose Flag Quotes A. Selection of substrates. In, a wide variety of substrates, materials, also features. Usually in the selection of the substrate material selection. Clothes, scarves, ties, school bags and other substrates, the choice of nylon; use thick nylon When substrates postcards, wallpaper, calendars, etc.,; When the substrate is glass, metal containers, wood, ceramic, plastic products, toys, you can choose monofilament nylon, thin polyester, stainless steel metal; may make use of polyester, stainless steel substrates for integrated circuits, semiconductor devices, insulating cloth, television components. (2) selection of problems needing attention ① weave uneven. There are several uneven intervals between the silk and silk, or when the good times and bad, which can cause the pore size changes in the of ink transfer, ink film thickness differences between Appears only in the local, such as network weaving uneven use should be as much as possible to avoid this part, so as not to affect the of quality. Jump wire woven in a root wire disconnected in the middle, forming a few centimeters off state, if attention can not be found, this defect will also affect to the of quality. Table 2-16 a variety of performance comparison table Comprehensive evaluation of silk nylon (polyamide) and polyester (PET) stainless steel The knitting method of the intensity changes in different (usually refers to plain weave) pattern in the weave, silk strength nylon, polyester is the strongest, silk, followed by a considerable strength of stainless steel, the application of value. Intensity is not too large, about the same strength and nylon, because of raw silk with sericin, line nodular. Can be woven into a fine high, a small opening. And the approximate strength of the nylon, the other with the nylon. To do a breakdown of a small opening in a special purpose. Line of the same diameter in the strength of stainless steel. Changes in tensile elongation-to-disconnect the short length is appropriate and good. But in the consider adaptive, should elongation and resilience be considered together. Elongation is very satisfactory, if the tension is too large, recovery is difficult to pattern prone to deformation. Elongation, easy to produce relaxation. Strong silk, resilience is ideal suitable. Ordinary filament elongation, but strong silk. Rebound performance, suitable for. Elongation, such as Niagara power will quickly elongate, resilient approximate zero. Subject to impact, cracking of depression can not be recovered. Flag Quotes

Feather Flag & Pole & Spike & Base: As low as $49.00 to $59.00 !
Custom 3x5 Flags: As low as $6.00 to $13.50 !
Hand Flags: As low as $0.50 to $1.50 !
Car Flags: As low as $1.00 to $3.00 !
  All pricing based on quantity desired.
 
Unlimited Colors & No Set-up Fee's!

Minimum Order: 1

 custom printed flags
 
  • Color:  Any colors are available, Unlimited Colors & No Set-up Fee's!

  • Logo:  Any logos are available

  • Flags Material:   Knitted material / 100% Polyester / Nylon / Cotton / Satin and etc

  • Flagpole Material:  Aluminium alloy / Fiberglass / Wooden / Plastic

  • Normal Flag Size:   2'x3', 3'x5', 4'x6', 5'x8' and can be customized.
  • Hand Flag Size:  5"x8",  8"x12", 12"x18" and can be customized.
  • Car Flag Size:  8"x12", 12"x18" and can be customized.
  • Feather Flag/Teardrop Flag size:
  • S, pole total height is 8.5ft, after setting up, it is about 7ft.  (flag size: about  5.8'x1.3' ) 
    M, pole total height is 11 ft, after setting up, it is about 9.2ft. (flag size: about 7.9'x2.0' )
    L, pole total height is 15.1ft, after setting up, it is about 13ft.  (flag size: about 11.2'x2.3' )
    XL, pole total height is 18.4ft, after setting up, it is about 16ft. (flag size: about 13.5'x2.6' )


  • Delivery Time:    small order – 1 to 2 days, big order – 10 to 15 days

  • Shipping Time:  1 to 2 days to North America, Europe.
  •                                           2 to 3 days to Australia, New Zealand.
  •                                           3 to 5 days to other countries.

Tags: