Car Flags Wholesale

Car Flags Wholesale

Car Flags Wholesale

custom flags   trade show table covers   Custom Tents   Beach Flags

Car Flags Wholesale   Car Flags Wholesale


Continuous ink-jet  machine is mainly used in the production of carpets and upholstery,  car flags wholesale machine  accuracy is relatively low, but the  speed is faster. Racing Checkered Flag

Two. Only in accordance with the  requirements of the spray droplet on-demand inkjet (DOD) demand drops inkjet  machine, sub-thermal pulse, piezoelectric, car flags wholesale solenoid valve and static four types. The most widely used is heat pulse inkjet  machine and piezoelectric pulse two types of  machine.

(1) thermal pulse jet  machine

Heat pulse jet  machine according to Buy Yard Flags the computer sends a signal moment the nozzle at the heating element heated to high temperature, the ink quickly reach high temperatures (about 400 ° C) state, leading to the volatile components in the ink vaporization of the formation of bubbles, so that ink droplets ejected from the nozzle hole by the heater, cooling bubble contraction, the release of the ink droplets. The ink chamber re-ink reservoir device is full, as shown in Figure 3-8. car flags wholesale Therefore, this , also known as micro-bubble jet . Discount Car Flags

Heat pulse nozzle heating and cooling at frequencies up to several thousand times per second, spray droplet is extremely subtle, and because of the impact generated by the bubble, car flags wholesale droplet injection speeds of up to 10 ~ 15m / s. The disadvantage of the heat pulse-jet  machine is the short life of the nozzle (a nozzle to spray ink 50mL ~ 500mL). car flags wholesale Temperatures greater than 350 ° C is easy to make some of the ingredients in the ink decomposition, Garden House Flags  undermine the stability of the ink and color brightness, and easy to make clogs. The main advantage of the heat pulse-jet  machine is a low cost of the nozzle.

Figure 3-8 hot pulse drops on demand ink jet  principle

(2) piezoelectric pulsed  machine

The piezoelectric ink-jet  machine is the use of piezoelectric sensors to exert impact on the ink. Computer-controlled changes in voltage applied to the piezoelectric sensor, with a voltage change occurs the volume contraction and expansion, the direction of volume change depends on the structure and shape of the piezoelectric material. When the contraction of the sensor will ink nozzle exert a direct pressure, high speed ejected from the nozzle. After the disappearance of the voltage, Decorative Flags And Banners  the piezoelectric material to restore to the normal size, the ink chamber to rely on capillary action device filled with the ink reservoir, shown in Figure 3-9.

Figure 3-9 piezoelectric drops on demand ink jet  principle

Piezoelectric nozzles per second about can spray droplet of about 14,000, slightly more than the heat pulse, smaller ink size of 150 × 10-8L. The piezoelectric nozzle resolution up to 1440dpi (dots per inch), car flags wholesale life is 100 times higher than the heat pulse. Piezoelectric spray some  machine is one of the focus on the development of inkjet  machine.

(B)  ink

To date, no universally applicable standard in digital textile jet  ink formulations, but all the ink formulations must meet the general requirements, such as viscosity, surface tension, density, vapor pressure, electrical conductivity, thermal stability, toxicity, easy flammable dye purity and solubility, mechanical adaptability, color yield, corrosion resistance, storage stability, color brilliance and light fastness and wash fastness, including viscosity, surface tension, stability, bright colors and the fastness of the most important indicators.

Inkjet  ink formulations, including a pigment (dye or paint), vector (adhesive / resin) and additives (including viscosity-adjusting agent, initiator, cosolvent, dispersant, defoamer, penetrant, moisturizing agents ), car flags wholesale in which the additive should be needed.

Feather Flag & Pole & Spike & Base: As low as $49.00 to $59.00 !
Custom 3x5 Flags: As low as $6.00 to $13.50 !
Hand Flags: As low as $0.50 to $1.50 !
Car Flags: As low as $1.00 to $3.00 !
  All pricing based on quantity desired.
Unlimited Colors & No Set-up Fee's!

Minimum Order: 1

 custom printed flags
  • Color:  Any colors are available, Unlimited Colors & No Set-up Fee's!

  • Logo:  Any logos are available

  • Flags Material:   Knitted material / 100% Polyester / Nylon / Cotton / Satin and etc

  • Flagpole Material:  Aluminium alloy / Fiberglass / Wooden / Plastic

  • Normal Flag Size:   2'x3', 3'x5', 4'x6', 5'x8' and can be customized.
  • Hand Flag Size:  5"x8",  8"x12", 12"x18" and can be customized.
  • Car Flag Size:  8"x12", 12"x18" and can be customized.
  • Feather Flag/Teardrop Flag size:
  • S, pole total height is 8.5ft, after setting up, it is about 7ft.  (flag size: about  5.8'x1.3' ) 
    M, pole total height is 11 ft, after setting up, it is about 9.2ft. (flag size: about 7.9'x2.0' )
    L, pole total height is 15.1ft, after setting up, it is about 13ft.  (flag size: about 11.2'x2.3' )
    XL, pole total height is 18.4ft, after setting up, it is about 16ft. (flag size: about 13.5'x2.6' )

  • Delivery Time:    small order – 1 to 2 days, big order – 10 to 15 days

  • Shipping Time:  1 to 2 days to North America, Europe.
  •                                           2 to 3 days to Australia, New Zealand.
  •                                           3 to 5 days to other countries.