Car Window Flag Poles Manufacturers

Car Window Flag Poles Manufacturers


custom flags   trade show table covers   Custom Tents   Beach Flags

Car Window Flag Poles Manufacturers   Car Window Flag Poles Manufacturers

 

Requirements are different. Water absorption and water retention, good resin, its thickening ability is not necessarily the best. And synthetic thickeners, metal ions in the electrolyte and pH car window flag poles manufacturers on water absorption and water-retention capacity. Heavy metal ions and-COO-to form insoluble salt, reduce water absorption and water-retention capacity. The presence of electrolytes (such as neutral inorganic salts) will reduce the osmotic pressure, car window flag poles manufacturers reduce the hydration of ions and reduce the degree of stretching of the mesh structure, will reduce water absorption and water-retention capacity. the effect of pH is also great, in acidic media, a COOH ionization diminished capacity, absorbent and water-retention capacity also decreased significantly.

The fourth quarter of finished product testing and packaging

Fabrics after dyeing, , finishing the last process is the inherent quality and appearance quality of the product to be tested, then the product rating classification based on test results, between into the decoration, , folding, posted trademarks fight with flower color, folded, rolled or rolls, packaging, , and finally sent to the factory or warehouse.

First, the quality inspection requirements car window flag poles manufacturers

(A) the intrinsic quality inspection

(1) the taking of life and use characteristics of the physical and mechanical properties is directly related to the fabric is a very important indicator. Often test the project following several car window flag poles manufacturers

(1) Length: required length of the match,  and dyeing cloth is generally 30m for the whole match, length less than 17.5m's called zero-cloth. 1 ~ 4.9m for the small zero-cloth, the length can not fight into the cloth into pieces, it must be noted in the inspection of the open cut, causing loss to the rabbit.

(2) Width:

 and dyeing cloth standard width = fabric Standard width × width processing coefficient.

(3) Density: root number to each 1Ocm fabric yarn, fabric Standard Density processing coefficient multiplied by the Density is the density of warp and weft of  and dyeing cloth. Specified in Table 4-2.

Table 4-2 dyeing cotton, sponge blended fabric width and density processing coefficient

The number of name car window flag poles manufacturers

Processing coefficient

The finished product category width processing coefficient density processing coefficient

By latitude

 

Print

 

Dye

 

Cotton

 

Cloth

The light staining cloth; mercerized flowers, color cloth and bleach, color, flower yarn fabric class 0.878 1.139 (coarse cloth) 0.92

(Fine cloth) 0.93

(Linen yarn) 0.98

This light, bleached mercerized plain cloth class; mercerized drift, color, flower tribute, serge, twill class 0.888 1.126 (serge twill) 0.93

(Yarn tribute) 0.98

Photobleaching twill fabric class; mercerized drift, color, flower poplin, twill, yarn gabardine fabric class 0.915 1.093 (poplin) 0.95

Light bleaching colored yarn khaki yarn gabardine fabric class; the mercerizing drift, color line gabardine class 0.935 1.070 (Khaki)

(Yarn gabardine) 0.96

(Line gabardine)

Mercerizing and bleaching, the color line, khaki fabric 0.945 (line khaki gabardine) 0.97

 and dyeing

Cotton blended cloth Xiping cloth

Poplin

Khaki its

Khaki its gabardine 0.920

0.945

0.945

0.950 1.07

1.06

1.06

1.05 0.95

0.96

0.96

0.97

 

(4) shrinkage: quality assessment indicators, sub-shrink-proof products and general product categories. Shrinkage related to the dimensional stability of the finished garments are shown in Table 4-3 and Table 4-4.

The provisions of Table 4-3 of the shrink-proof finishing product shrinkage

Shrinkproof category shrinkage of <%> is not greater than


Feather Flag & Pole & Spike & Base: As low as $49.00 to $59.00 !
Custom 3x5 Flags: As low as $6.00 to $13.50 !
Hand Flags: As low as $0.50 to $1.50 !
Car Flags: As low as $1.00 to $3.00 !
  All pricing based on quantity desired.
 
Unlimited Colors & No Set-up Fee's!

Minimum Order: 1

 custom printed flags
 
  • Color:  Any colors are available, Unlimited Colors & No Set-up Fee's!

  • Logo:  Any logos are available

  • Flags Material:   Knitted material / 100% Polyester / Nylon / Cotton / Satin and etc

  • Flagpole Material:  Aluminium alloy / Fiberglass / Wooden / Plastic

  • Normal Flag Size:   2'x3', 3'x5', 4'x6', 5'x8' and can be customized.
  • Hand Flag Size:  5"x8",  8"x12", 12"x18" and can be customized.
  • Car Flag Size:  8"x12", 12"x18" and can be customized.
  • Feather Flag/Teardrop Flag size:
  • S, pole total height is 8.5ft, after setting up, it is about 7ft.  (flag size: about  5.8'x1.3' ) 
    M, pole total height is 11 ft, after setting up, it is about 9.2ft. (flag size: about 7.9'x2.0' )
    L, pole total height is 15.1ft, after setting up, it is about 13ft.  (flag size: about 11.2'x2.3' )
    XL, pole total height is 18.4ft, after setting up, it is about 16ft. (flag size: about 13.5'x2.6' )


  • Delivery Time:    small order – 1 to 2 days, big order – 10 to 15 days

  • Shipping Time:  1 to 2 days to North America, Europe.
  •                                           2 to 3 days to Australia, New Zealand.
  •                                           3 to 5 days to other countries.

Tags: