Car Wing Mirror Flags



Car Wing Mirror Flags

Car Wing Mirror Flags


custom flags   trade show table covers   Custom Tents   Beach Flags

Car Wing Mirror Flags   Car Wing Mirror Flags

                                                  Emission

Wastewater grille adjust the pool anaerobic hydrolysis tank biological contact oxidation tank sedimentation tank – → → emissions

 Discount Custom Car Flags

Figure 5-4 hair coarse textile products typical dyeing wastewater treatment processes

(2) the main process parameters: car wing mirror flags

grille: the process grille is generally set to two, a fixed grille, the other is used in the automatic clean-up rotary grill.

Adjust the pool: the residence time T = 6 ~ 8h, the COD removal rate of 8% to 10%, and more generally pre-aeration.

anaerobic hydrolysis acidification tank: the residence time T = 4 ~ 6h, the cell body 1/3 to 2/3 of the installation of filler, the COD removal efficiency of 20% to 30%. car wing mirror flags

biological contact oxidation ponds: Sec method can be used or a piece of France, built-in semi-soft type packing, the residence time T = 4 ~ 6h. Gas to liquid ratio of 15 ~ 20: l, the COD removal efficiency of 50% to 60%.

sedimentation tanks: the type of vertical flow Racing Checkered Flag  sedimentation tank, the settling time T = 2.0h.

    (6) biological carbon pool: the biological carbon pool needs with backwash equipment, residence time T = 0.5 ~ 1.0 h, air to water ratio of 8:1, COD removal efficiency of 50% to 60%, color removal 70% to 80%.

    photochemical oxidation ponds: residence time T = 0.5 1.0h, COD removal efficiency of 50%, 80% color removal.

    coagulation and sedimentation: car wing mirror flags drugs to polymeric aluminum-based residence time T = 2.0h, the COD removal efficiency of 50%, 50% of color removal.

    Depending on the emission standards, wastewater from different parts of the emissions.

    Two. Hair fine textile products, dyeing wastewater treatment

Wastewater treatment processes: (1) Due to the low organic pollutant content of the hair fine textile wastewater, so the process is shorter. Dyeing wastewater treatment process in accordance with the actual situation of the enterprises also can be coarse wool textile products. Simply select the appropriate design parameters, car wing mirror flags anaerobic hydrolysis and biological contact oxidation process, the wastewater discharge standards can be achieved. The typical process shown in Figure 5-5.

                                          Emission Auto Racing Flags For Sale

Wastewater grille adjust the pool biological contact oxidation tank sedimentation tank – → → emissions

 

Figure 5-5 hair fine textile products typical dyeing wastewater treatment process

(2) the main process parameters: car wing mirror flags

grille: the process set grille two, respectively, for a manual clean-up grille, an automatic rotary mechanical grid.

    Adjust the pool: the residence time T = 6 ~ 8h.

    The biological contact oxidation pond: water ratio of 15 to 18:1, the residence time T = 3 ~ 5h.

    settling ponds: sedimentation time T = 5 ~ 2.0h.

    Subsequent processing unit of the relevant parameters and the removal rate of similar cell parameters, refer to the coarse wool textile products typical wastewater treatment processes and make appropriate changes.

Three, silk  and dyeing products, wastewater treatment

    The silk  and dyeing of silk  and dyeing and simulation silk  and dyeing two. Dyeing and  process of the two products, the use of dyes and auxiliaries are not the same, and thus the discharge of waste water quality, and the process of governance is not the same.

   (A) natural silk  and dyeing products wastewater treatment

    Natural silk waste water is divided into two kinds of degumming wastewater and dyeing wastewater.


Feather Flag & Pole & Spike & Base: As low as $49.00 to $59.00 !
Custom 3x5 Flags: As low as $6.00 to $13.50 !
Hand Flags: As low as $0.50 to $1.50 !
Car Flags: As low as $1.00 to $3.00 !
  All pricing based on quantity desired.
 
Unlimited Colors & No Set-up Fee's!

Minimum Order: 1

 custom printed flags
 
  • Color:  Any colors are available, Unlimited Colors & No Set-up Fee's!

  • Logo:  Any logos are available

  • Flags Material:   Knitted material / 100% Polyester / Nylon / Cotton / Satin and etc

  • Flagpole Material:  Aluminium alloy / Fiberglass / Wooden / Plastic

  • Normal Flag Size:   2'x3', 3'x5', 4'x6', 5'x8' and can be customized.
  • Hand Flag Size:  5"x8",  8"x12", 12"x18" and can be customized.
  • Car Flag Size:  8"x12", 12"x18" and can be customized.
  • Feather Flag/Teardrop Flag size:
  • S, pole total height is 8.5ft, after setting up, it is about 7ft.  (flag size: about  5.8'x1.3' ) 
    M, pole total height is 11 ft, after setting up, it is about 9.2ft. (flag size: about 7.9'x2.0' )
    L, pole total height is 15.1ft, after setting up, it is about 13ft.  (flag size: about 11.2'x2.3' )
    XL, pole total height is 18.4ft, after setting up, it is about 16ft. (flag size: about 13.5'x2.6' )


  • Delivery Time:    small order – 1 to 2 days, big order – 10 to 15 days

  • Shipping Time:  1 to 2 days to North America, Europe.
  •                                           2 to 3 days to Australia, New Zealand.
  •                                           3 to 5 days to other countries.

Tags: