Custom Flags For Sale Online, Flags For Sale
Opening (hole) opening to said space area of the mesh with mesh side length.Custom Flags For Sale Online Mesh small amount of ink, so the of fine patterns should be elected to hold small mesh. The mesh is suitable for field and ink thickness . Fine, coarse three opening, you can use selection, silk quality uneven, not suitable for fine product . The most suitable opening between 31 microns to 161 microns. Is no change in the round bone nylon yarn varieties, wide use. And nylon, as fine and coarse points, more varieties. Singlet and twisting performance is slightly different. Opening a small performance, opening Stretching difficult, but is not easy to use. Software with the film's adhesion said, Flags For Sale referring to the cutouts used for making plates, film and photographic film with the film. The film and adhesive performance is good or bad plays an important role. Silkworm cutouts plate method and photomechanical, good film adhesion, use value, the silkworm is a rough surface, the line itself has good moisture absorption. Compared with the silk surface with good smoothness, moisture absorption, less adhesion. However, polyamide with hydrophilic pro-solvent, no difference in practical applications with the wire. Than nylon moisture absorption is small, and poor adhesion of the film. Such as surface treatment available. Moisture absorption is equal to zero, the fit is the most difficult. If the surface roughening with alkali or strong solvent for surface treatment, can improve the adhesion with the film emulsion. Ink through the performance ink water-in-oil type, Custom Flags For Sale Online solvent type variety, are sticky issued on a flow of These flows are in the printed version of scraping pressure through the mesh of ink printed on paper or fabric surface. Ink through the performance of its mesh size, to the surface smoothness of silk. Thick ink applied to the good performance of transparent ink. Wire hydrophobic ink through. However, due to the opening of the uneven, it is not suitable for the of minor products. Hydrophobic properties of silk slightly larger, but the surface is uniform, smooth thin woven into some ink through good performance, ink hard can also be used. But should be prevented through the phenomenon of uneven ink distribution due to electrostatic interactions. The Nylon effect, but is interwoven through the Mexican poor. Stretching elastic pressurized squeegee resilience. Therefore, even if there is good through the ink, easy to stick to a dirty squeegee pressure. The thick of the network, through ink. Flags For Sale The water resistance of the water resistance is needed, ideal insoluble, swelling, softening, not stretching. The current below 60 ℃, with water resistance, such as prolonged soaking, the wire surface of the varnish is swelling due to water absorption. If the heating water absorption increased, causing the picture is not clear, and should avoid such a situation the water resistance, not expansion, but a slight elongation. If the high temperature processing can overcome this drawback. Water resistance, strength did not change when wet. Elongation is small, stretching in the water. Water resistance, good chemical resistance performance (special exception) can be freely used. The oil resistance of the oil resistance is a necessary condition. Ideal as a with immersion oil without causing deterioration. Fibers are highly resistant to vegetable oil, mineral oil, the nature of the solvent can be used. Little expansion, but does not affect the ink through the is heavy, should be noted that the strength decreases. Good oil resistance, strength does not change, suitable for large amounts of the . It should be noted due to the ink version of the role will film and peeling. Good oil resistance, even if the heating is not expansion. Adhesion with the film is worse than nylon, its performance is sometimes affected by other factors, should be noted. Oil resistance is good, but there are also oleophobic, and therefore affect the . Therefore, the surface should be fully clean. ② uneven thickness of the wire.Custom Flags For Sale Online The net is woven from silk, is generally considered that the thickness of the wire are more or less the same, in fact, not. Due to the thickness of the changes in the mesh, so that a part of the network thickening or thinning, the will appear when the phenomenon of ink uneven thickness.
Feather Flag & Pole & Spike & Base: As low as $49.00 to $59.00 !
Custom 3x5 Flags: As low as $6.00 to $13.50 !
Hand Flags: As low as $0.50 to $1.50 !
Car Flags: As low as $1.00 to $3.00 !
All pricing based on quantity desired.
Unlimited Colors & No Set-up Fee's!
Minimum Order: 1
- Color: Any colors are available, Unlimited Colors & No Set-up Fee's!
- Logo: Any logos are available
- Flags Material: Knitted material / 100% Polyester / Nylon / Cotton / Satin and etc
- Flagpole Material: Aluminium alloy / Fiberglass / Wooden / Plastic
- Normal Flag Size: 2'x3', 3'x5', 4'x6', 5'x8' and can be customized.
- Hand Flag Size: 5"x8", 8"x12", 12"x18" and can be customized.
- Car Flag Size: 8"x12", 12"x18" and can be customized.
- Feather Flag/Teardrop Flag size:
- S, pole total height is 8.5ft, after setting up, it is about 7ft. (flag size: about 5.8'x1.3' )
M, pole total height is 11 ft, after setting up, it is about 9.2ft. (flag size: about 7.9'x2.0' )
L, pole total height is 15.1ft, after setting up, it is about 13ft. (flag size: about 11.2'x2.3' )
XL, pole total height is 18.4ft, after setting up, it is about 16ft. (flag size: about 13.5'x2.6' )
- Delivery Time: small order – 1 to 2 days, big order – 10 to 15 days
- Shipping Time: 1 to 2 days to North America, Europe.
- 2 to 3 days to Australia, New Zealand.
- 3 to 5 days to other countries.
Tags: printed flags