Custom Garden Flags Wholesale, Custom Garden Flags

Custom Garden Flags Wholesale, Custom Garden Flags


custom flags   trade show table covers   Custom Tents   Beach Flags

Custom Garden Flags Wholesale   Custom Garden Flags Wholesale

Custom Garden Flags   Custom Garden Flags

 

Film affixed to the polyester chip, there are three ways: First, using ordinary transparent tape affixed; thin double-sided adhesive paste between the film and polyester round pieces; Custom Garden Flags Wholesale is to use spray adhesive patch, which the network part of the ( If the entire network layout of the three sides of bleeding) is the most favorable. Spray adhesive sticky, easy to dry.

 

First edition fight finished as a master, remove the version of grid, the second Dacron in the first edition, check the two editions of the rules line overlap, and then double-sided adhesive bonding at both ends of the second edition live is not easy to walk up and down. The majority of the second edition of the first fight the black version, the two editions of the stacked, Wind Flags and text are complete, easy to check the paste-like, check accuracy. Green version, the yellow version of the spelling as above. Custom Garden Flags Wholesale

 

The four-color spell finished, should all set in the positioning bar double-check it again. Also can supplies the red version by Zhang check. Protection film, no scratches and to prevent stretching, every fight to complete a version need to be to stand flat on the glass table or hanging on the film cabinet. Swooper Flags Wholesale Prices

 

(c) sample inspection, modification. When all the forum to fight after a blue kind. The resulting blue kind, not the so-called color proofs, but a blue or dark purple to black and white proofs, used to check the specifications of size, image position, text and sequence quality.

 

The kind of work of the out of blue is by the make-up personnel their own completed. The material is similar to the sun blue drawings. Blueprint in the proofing rack. Generally black version of the next, magenta, green positioning. Finished to send the sample checked and proofread.

 

Sun blue kind of color proofing to save time not only, but also economic, simple. Personalized Flags Wholesale Why do not you hit the color sample  In addition to the above reasons, but also: color separation films are played before the imposition color kind of kind of bad as ever, the gap between small amendments to the replay, the gap is slightly larger separation,  Custom Garden Flags Wholesale the complex repair manual, quality does not change significantly; sample under the same conditions, uniform ink and paper, they will fight in a version are basically balanced tone; original good quality  paper is superior proofing paper customers often pay attention to the actual effect of proofing and s, not to insist on the original effect; film to check the layout before, such as proofs hierarchical level, not bright colors can be magenta, green or yellow piece out, the appropriate amendment or re-copy master exposure time, so that the contrast is greater than the original film, in order to ; workplace uniform and constant temperature and humidity. Make-up method is accurate and reliable. Attention to the practices and film make-up process, to fight the finished version to properly hang put, Custom Garden Flagsto avoid stretching deformation. Produce dislocation are not allowed to proofing before can check found that heavy fight.

 

 

 

July and photoengraving equipment

 

 

 

A process camera. Plate camera placed the originals in the original frame, a fixed lens, lens frame, adjust the focal length camera obscura and camera obscura together to place the cassette of the photosensitive material composition. These three parts in a common rack perpendicular to the ground. Original frame and lens mounted on a rack along the rail around the mobile light with frosted glass and the film frame under normal circumstances is fixed with.

 

Plate camera, shooting the original opto-mechanical, it can on the original full-size shot, according to a certain degree of magnification to zoom in or zoom out on the original.

 


Feather Flag & Pole & Spike & Base: As low as $49.00 to $59.00 !
Custom 3x5 Flags: As low as $6.00 to $13.50 !
Hand Flags: As low as $0.50 to $1.50 !
Car Flags: As low as $1.00 to $3.00 !
  All pricing based on quantity desired.
 
Unlimited Colors & No Set-up Fee's!

Minimum Order: 1

 custom printed flags
 
  • Color:  Any colors are available, Unlimited Colors & No Set-up Fee's!

  • Logo:  Any logos are available

  • Flags Material:   Knitted material / 100% Polyester / Nylon / Cotton / Satin and etc

  • Flagpole Material:  Aluminium alloy / Fiberglass / Wooden / Plastic

  • Normal Flag Size:   2'x3', 3'x5', 4'x6', 5'x8' and can be customized.
  • Hand Flag Size:  5"x8",  8"x12", 12"x18" and can be customized.
  • Car Flag Size:  8"x12", 12"x18" and can be customized.
  • Feather Flag/Teardrop Flag size:
  • S, pole total height is 8.5ft, after setting up, it is about 7ft.  (flag size: about  5.8'x1.3' ) 
    M, pole total height is 11 ft, after setting up, it is about 9.2ft. (flag size: about 7.9'x2.0' )
    L, pole total height is 15.1ft, after setting up, it is about 13ft.  (flag size: about 11.2'x2.3' )
    XL, pole total height is 18.4ft, after setting up, it is about 16ft. (flag size: about 13.5'x2.6' )


  • Delivery Time:    small order – 1 to 2 days, big order – 10 to 15 days

  • Shipping Time:  1 to 2 days to North America, Europe.
  •                                           2 to 3 days to Australia, New Zealand.
  •                                           3 to 5 days to other countries.

Tags: