Printed Car Flags, Custom Printed Car Flags

Printed Car Flags, Custom Printed Car Flags

custom flags   trade show table covers   Custom Tents   Beach Flags

Printed Car Flags   Custom Printed Car Flags


Some varieties of the dye in the dye color is pale, the  imperceptible India defect. In order to facilitate observation, often in the  paste, add some cotton fiber affinity and because the easy washing of acid Discount Checkered Flags dyes to show the coloring. custom printed car flags Show color agents: CI Acid Orange 1, CI Acid Orange 27, CI Acid Violet 7, CI Acid Blue 1. Soluble vat dyes under acidic conditions can be oxidants into the original vat dyes and color, but because of different dyes, the oxidation of difficulty is different, generally can be divided into easily oxidized, in general, difficult oxidation of three categories. Soluble vat dyes can be dissolved in water, but the solubility of the dye is not custom printed car flags the same, under normal circumstances, available 50 ~ 80 warm water to dissolve, but the individual dyes must be added to the cosolvent.

Cosolvent to join, in addition to increase the dye solubility, but also to enhance the color, brightness and color fastness have a certain effect. Cosolvent: dissolved salt B, dithiobis ethanol, urea, ethylene glycol ethyl ether, diethylene glycol. Dissolved salt B and urea. Urea can not be excessive, otherwise it will affect the dye hair color.

Color soluble vat dyes, generally can be divided into two categories, namely, the acid bath and steaming. The representative of the acid bath of sodium nitrite method, steaming on behalf of sodium chlorate – ammonium thiocyanate method. Commonly used in direct , the sodium nitrite method and the two kinds of sodium chlorate – ammonium thiocyanate method. The sodium nitrite method is direct  for a brief introduction. custom printed car flags

(1) process:

Acid color of the  drying → → to take the air water washing soaping washing drying.

(2) prescription:

Original paste 40 ~ 60kg

Dye 1 to 5 kg

Soda ash (or ammonia) 0.2 kg custom printed car flags

Cosolvent 0 ~ 3kg

Hot water x

Sodium nitrite 0.2-2kg

The synthesis of 100 kg

(3): dye and cosolvent mixture, add hot water to dissolve to clarify (blue IBC is preferable to dissolve in cold water), and the other will be added to the original paste of soda ash dissolved dye filtration and then dissolved into a paste, and finally sodium nitrite dissolved, stir, filter and set aside. Advertising Feather Flags

(4) color, and post-processing:

Sulfuric acid (500Be) 20-40ml

Leveling agent 0.5g / L,

Color liquid temperature is divided into third gear based on the dye oxidation properties of easy oxidation of 25 ~ 3O ° C, generally 50 to 60 ° C, custom printed car flags the difficult oxidation of 70 ~ 78 .

Color 15 ~ 30s, after the leak is fully washed, then boiled soap.

(B) direct the reactive dyes  reactive dyes are a class of water-soluble dyes and existing dyes and fiber reaction of covalent bond in a class of dye. Active in the structure of dyes under alkaline conditions and fiber hydroxy or amino combine to form covalent bonds, it can be used for dyeing and  of cellulose fibers and protein fibers.

Commonly used in domestic reactive dyes according to their active Decorative Flags And Banners genes can be divided into the X-type, KN, K and M type. The order of the size of the active X> M> (KN)> K, and its stability on the contrary, that is, the higher the reactivity of the dye, the more unstable, easily hydrolyzed stability is poor, made of paste,  custom printed car flags the finished product prone to the "key" split between the dye maternal and fiber during storage. Therefore, the high reactivity of the X-type dye should not be used for  with dye, K and KN reactive dyes  production is often used, sometimes can be a small amount of several X-type reactive dyes to color requirements and the chromatography, .

Feather Flag & Pole & Spike & Base: As low as $49.00 to $59.00 !
Custom 3x5 Flags: As low as $6.00 to $13.50 !
Hand Flags: As low as $0.50 to $1.50 !
Car Flags: As low as $1.00 to $3.00 !
  All pricing based on quantity desired.
Unlimited Colors & No Set-up Fee's!

Minimum Order: 1

 custom printed flags
  • Color:  Any colors are available, Unlimited Colors & No Set-up Fee's!

  • Logo:  Any logos are available

  • Flags Material:   Knitted material / 100% Polyester / Nylon / Cotton / Satin and etc

  • Flagpole Material:  Aluminium alloy / Fiberglass / Wooden / Plastic

  • Normal Flag Size:   2'x3', 3'x5', 4'x6', 5'x8' and can be customized.
  • Hand Flag Size:  5"x8",  8"x12", 12"x18" and can be customized.
  • Car Flag Size:  8"x12", 12"x18" and can be customized.
  • Feather Flag/Teardrop Flag size:
  • S, pole total height is 8.5ft, after setting up, it is about 7ft.  (flag size: about  5.8'x1.3' ) 
    M, pole total height is 11 ft, after setting up, it is about 9.2ft. (flag size: about 7.9'x2.0' )
    L, pole total height is 15.1ft, after setting up, it is about 13ft.  (flag size: about 11.2'x2.3' )
    XL, pole total height is 18.4ft, after setting up, it is about 16ft. (flag size: about 13.5'x2.6' )

  • Delivery Time:    small order – 1 to 2 days, big order – 10 to 15 days

  • Shipping Time:  1 to 2 days to North America, Europe.
  •                                           2 to 3 days to Australia, New Zealand.
  •                                           3 to 5 days to other countries.