Custom Swooper Flags
② indirect Stretching method. Custom Swooper Flags Taut after the working platform rise, hold up the screen frame, so that a certain angle with the screen frame on the face, so that good contact with the screen frame bonding surface, and then cement, as shown in Figure 2-42. Figure 2-41 direct stretching method 1 – 2 – screen frame – Stretching Chuck – Work Figure 2-42 indirect Stretching France 1 – 2 – screen frame – Stretching chuck 4 – Table Direct, indirect, two stretching method have their own characteristics, Custom Flags And Banners Designs
but experiments show that the extent and speed of stretching tension weakened different. Indirect Stretching law tension weakening of the extent and speed of greater than direct stretching method, to be placed in stretching after a period of time, Custom Swooper Flags until the tension is no longer changed, then the plate. In addition, indirect Stretching France Stretching increased the workbench the same height, the size of the screen frame and size ratio, the higher the degree of tension weakened.
Stretching angle choice. Stretching angle is the angle of the sides defined by latitude (silk) screen frame. Stretching in two forms, one is positive Stretching, another bias Stretching. The following are described the methods of the two kinds of stretching. ① is stretching. Is Stretching by latitude from four edges of the other parallel and perpendicular to the screen frame. Custom Swooper Flags
Namely, latitude and edge of the box was 90 ° (see Figure 2-43). Being stretched method to reduce waste. However, in this form of stretching plate prone to moire chromatic , the chromatic should be used oblique stretching. ② oblique stretching. Bias Stretching (Figure 2-44) will help improve the of quality, also have some effect on the increase through the ink. Its lack of waste larger. While chromatic should be to take the ramp stretching, but the actual stretching, in order to reduce waste, generally copy the product the majority of the factories still are stretching. Order Flags Online
Figure 2-43 is Stretching Figure 2-44 bias Stretching In the high precision color , and sometimes bias stretching method. Stretching the point of view the choice has a direct impact on the of quality stretch wind angle choice is not suitable, there will be moire. Therefore, the general replica of the , often stretching angle is 20 ~ 35 ° high resolution board due to higher use of mesh stretching angle to match, in order to effectively prevent the tortoises pattern. Also spoke on the point of view in the bottom plate to produce a 8 screen frame stretching method. Pneumatic Stretching Machine, the activities of network folder pull the net, can not be directly obtained by the inclined screen, the edge of the mesh and the screen frame into a certain angle of the screen (Figure 2-45). In this regard, the available control box or control panel Stretching solve. Pull the net, and the other with a larger box or wood as a control rack arrangement and support network folder, remains being put, is to pull in the control box,
a screen frame at the desired angle diagonal and on the box, including fixed-line derived from the inclined screen. Figure 2-45 oblique screen and small screen stretching France Similarly, a large control panel (or box) to support the network folders, small boxes arranged in a large board, so that the widening net, stick a small version of the time, the small screen,
is both, the net material , but also improve the uniformity of the small screen tension. . Stretching steps. ① the surface of the screen frame. Coarsening and decontamination. ② coated with a sticky net plastic. Surface treatment of the screen frame, Digital Flag Printing
immediately after its sticky mesh brushing a layer of sticky net plastic. Is easy to observe, sticky glue of network can be added to the appropriate dyes, such as alcohol-soluble sticky net plastic red pen oil can be added. The adhesive can be used painting brush, brush width is half the width of the box section. Glue concentration should not be too large to be a good two Tu, the first coating to pass, after the surface is dry, apply a second
time. Adhesive by the adhesive method is often referred to as the sticky net plastic bonding firm needs and its performance should meet and network box should be water-resistant, resistant to commonly used solvents in the screen , resistant to temperature changes, not damaged and should be quick-drying . Depending on the screen frame, the material properties of the ink and plate reagent, to choose the appropriate sticky net plastic.
Feather Flag & Pole & Spike & Base: As low as $49.00 to $59.00 !
Custom 3x5 Flags: As low as $6.00 to $13.50 !
Hand Flags: As low as $0.50 to $1.50 !
Car Flags: As low as $1.00 to $3.00 !
All pricing based on quantity desired.
Unlimited Colors & No Set-up Fee's!
Minimum Order: 1
- Color: Any colors are available, Unlimited Colors & No Set-up Fee's!
- Logo: Any logos are available
- Flags Material: Knitted material / 100% Polyester / Nylon / Cotton / Satin and etc
- Flagpole Material: Aluminium alloy / Fiberglass / Wooden / Plastic
- Normal Flag Size: 2'x3', 3'x5', 4'x6', 5'x8' and can be customized.
- Hand Flag Size: 5"x8", 8"x12", 12"x18" and can be customized.
- Car Flag Size: 8"x12", 12"x18" and can be customized.
- Feather Flag/Teardrop Flag size:
- S, pole total height is 8.5ft, after setting up, it is about 7ft. (flag size: about 5.8'x1.3' )
M, pole total height is 11 ft, after setting up, it is about 9.2ft. (flag size: about 7.9'x2.0' )
L, pole total height is 15.1ft, after setting up, it is about 13ft. (flag size: about 11.2'x2.3' )
XL, pole total height is 18.4ft, after setting up, it is about 16ft. (flag size: about 13.5'x2.6' )
- Delivery Time: small order – 1 to 2 days, big order – 10 to 15 days
- Shipping Time: 1 to 2 days to North America, Europe.
- 2 to 3 days to Australia, New Zealand.
- 3 to 5 days to other countries.