Custom Teardrop Flags

Custom Teardrop Flags

Custom Teardrop Flags

custom flags   trade show table covers   Custom Tents   Beach Flags

Custom Teardrop Flags   Custom Teardrop Flags


The process.


Is expected to open the machining inspection finished product polishing degreasing medicine white anodic oxidation screen  drying closed go I ink


process description. Beach Flags Poles


a. Materials. Material directly elected semi-hard pure aluminum L2Y industry, requiring a smooth surface, no obvious clip gray, the calendering marks, deep etch points and scratches.


(b) polishing. Mechanical polishing with a soft cloth to round out the light, so that the aluminum surface was mirror-like.


(c) To the oil. To the oil is generally 35 ~ 45 in the detergent solution in order to maintain the aluminum surface finish is not damaged. Backpack Flags


(d) Medicine white. The aim of medicine white aluminum surface shiny and soft, not bright, in order to meet the ergonomic requirements. Medicine white solution formula given below:


Sodium hydroxide 50 ~ 60g;


Sodium carbonate 50 ~ 60g;


Water to 1000ml.


Temperature of 70 ~ 85 ;


5 to 10 minutes.


Medicine white aluminum plate rinse, and then placed in dilute nitric acid solution and processing.


Sometimes in order to make the surface more white, aluminum stick some wet 200 mesh 95% calcium carbonate powder, drama in the drama board machine system can also be used to brush the stained wet calcium carbonate powder in the aluminum surface brushing , and then rinse with water board, then add the white liquid of the above-mentioned drugs, drug white handle.


e. Anodic oxidation. Anodic oxidation to generate a thickness of 10μm oxide layer in the surface of the aluminum, aluminum of drug flour not only protect from damage and, Custom Advertising Feather Flags more importantly, a thick layer of oxide film has a high adsorption capacity, can be printed on ink on firmly adsorbed on the oxide film of fine loose hole, flat graphic effects.


f. Screen .  Custom Feather Flags Wholesale


260 through 320 purpose polyester  plate is generally used, the rough edges too thin network lines of printed handwriting, often with a more pronounced "sawtooth", the dense network  ink is not easy by text graphics could easily lead to incomplete. The screen  ink of the water white oxide signs solvent has a strong dissolution, on the production of  plates, the only sensitive adhesive or photographic film, censorship can only be used close up rubber.


Screen  water white oxide signs of ink, generally have a room temperature curing and two heatset, room temperature curing type ink more. Produced a number of chromatography products, subject to the same color ink surface adhesion, and then  the next color.


Feather Flags Feather Flags Wholesale Custom Feather Flags

Feather Flag & Pole & Spike & Base: As low as $49.00 to $59.00 !
Custom 3x5 Flags: As low as $6.00 to $13.50 !
Hand Flags: As low as $0.50 to $1.50 !
Car Flags: As low as $1.00 to $3.00 !
  All pricing based on quantity desired.
Unlimited Colors & No Set-up Fee's!

Minimum Order: 1

 custom printed flags
  • Color:  Any colors are available, Unlimited Colors & No Set-up Fee's!

  • Logo:  Any logos are available

  • Flags Material:   Knitted material / 100% Polyester / Nylon / Cotton / Satin and etc

  • Flagpole Material:  Aluminium alloy / Fiberglass / Wooden / Plastic

  • Normal Flag Size:   2'x3', 3'x5', 4'x6', 5'x8' and can be customized.
  • Hand Flag Size:  5"x8",  8"x12", 12"x18" and can be customized.
  • Car Flag Size:  8"x12", 12"x18" and can be customized.
  • Feather Flag/Teardrop Flag size:
  • S, pole total height is 8.5ft, after setting up, it is about 7ft.  (flag size: about  5.8'x1.3' ) 
    M, pole total height is 11 ft, after setting up, it is about 9.2ft. (flag size: about 7.9'x2.0' )
    L, pole total height is 15.1ft, after setting up, it is about 13ft.  (flag size: about 11.2'x2.3' )
    XL, pole total height is 18.4ft, after setting up, it is about 16ft. (flag size: about 13.5'x2.6' )

  • Delivery Time:    small order – 1 to 2 days, big order – 10 to 15 days

  • Shipping Time:  1 to 2 days to North America, Europe.
  •                                           2 to 3 days to Australia, New Zealand.
  •                                           3 to 5 days to other countries.