Customized Garden Flags

Customized Garden Flags


custom flags   trade show table covers   Custom Tents   Beach Flags

Customized Garden Flags   Customized Garden Flags

 

Degumming process are summarized as follows:

A. A cooking method This method is suitable for spinning twine. Process as follows: the unpacking Xie beam original Ma Baptist acid lye a scouring washing fiber fight and washing acid pickling washing dewatering → → drying oil. Customized Garden Flags

Two. Two cooking method this method is suitable for low-spun yarn. The process is: dip the unpacking Xie beam acid → → washing washing first scouring second scouring pickling playing fiber and washing washing dewatering dehydration to the oil → → drying.

3. The two cook a bleaching method is suitable for spinning branched yarn. The process is: dip the unpacking Xie beam acid → → washing washing time scouring the second scouring playing fiber and water washing bleaching pickling Customized Garden Flags washed dehydration to oil dehydration drying.

4. Two cook two drift method This method is suitable for spinning yarn. The process is: dip the unpacking Xie beam acid → → washing washing time scouring the second scouring the playing fiber and phenylephrine pickling washed dehydration to oil dehydration drying.

(B) ramie woven material pre-treatment

Ramie fabric pre-treatment, is basically similar to the pretreatment of cotton fabric, composed mainly by singeing, desizing, scouring and bleaching process.

A. Singeing the number of ramie fabric hairiness, ramie fiber rigidity, therefore, singeing than the cotton fabric is more important, otherwise the fabric fluff be prickly. Customized Garden Flags Ramie singeing require high-speed burn through the most appropriate equipment is gas singeing machine, requiring configuration to dual-jet crater or cyclone premixed jet new crater, these crater flame temperature up to 1350 ° C in the hot and fast conditions, Customized Garden Flags which would ensure both burn the fluff, does not damage the fiber, a burn through the crater above the configured not to cold water roller to enhance the penetration of the flame. The singeing recoverable two positive and two anti-speed 80 ~ 100m/min.

Two. Desizing, scouring and desizing purpose is to remove the slurry on the fabric and some impurities. The purpose of scouring is to remove the fibers with biological, so that the fabric is absorbent, so that in the adsorption and diffusion of dyes and chemicals. Ramie fabric scouring at atmospheric pressure. Ramie thin fabric, desizing, scouring and one heavy fabric or cotton products, desizing after scouring; ramie and polyester blended fabric, Customized Garden Flags ramie fiber is pre-full unglued, so do not special scouring. Desizing, scouring and the key is to evenly through to the complex to the net. In addition, due to poor ramie resistance to acid, alkali and oxidant, in the formulation process should pay particular attention to. Scouring solution of NaOH 5g / L standard practice liquid can be added to better penetration and wash the role of surfactants to accelerate the training liquid penetrate into the fabric interior, and to prevent dirt and then stain the fabric.

Desizing, scouring and width of continuous steaming equipment, steaming should be in the double liquid crawler steaming box or R steaming box, these devices have the function of steam under cook, capacity large quantity of cloth, steaming time, fabric dipping in lye full, desizing, scouring and more through good effect.

3. Bleached ramie fabric bleach can be used chlorine bleach or oxygen bleach, sodium hypochlorite bleach, dilute solution for a long time bleaching, Customized Garden Flags the bleaching effect of the bleaching effect of a shorter time better, this is because of the ramie fibers were thicker, a short period of time the chemicals are not well soaked . Sodium hypochlorite bleach will produce yellowing phenomenon, which can be resolved by the use of hydrogen peroxide dechlorination. Therefore, using oxygen and chlorine pairs drift is a good process. Ramie fabric treatment process in addition to the thin fabric to the width processing.


Feather Flag & Pole & Spike & Base: As low as $49.00 to $59.00 !
Custom 3x5 Flags: As low as $6.00 to $13.50 !
Hand Flags: As low as $0.50 to $1.50 !
Car Flags: As low as $1.00 to $3.00 !
  All pricing based on quantity desired.
 
Unlimited Colors & No Set-up Fee's!

Minimum Order: 1

 custom printed flags
 
  • Color:  Any colors are available, Unlimited Colors & No Set-up Fee's!

  • Logo:  Any logos are available

  • Flags Material:   Knitted material / 100% Polyester / Nylon / Cotton / Satin and etc

  • Flagpole Material:  Aluminium alloy / Fiberglass / Wooden / Plastic

  • Normal Flag Size:   2'x3', 3'x5', 4'x6', 5'x8' and can be customized.
  • Hand Flag Size:  5"x8",  8"x12", 12"x18" and can be customized.
  • Car Flag Size:  8"x12", 12"x18" and can be customized.
  • Feather Flag/Teardrop Flag size:
  • S, pole total height is 8.5ft, after setting up, it is about 7ft.  (flag size: about  5.8'x1.3' ) 
    M, pole total height is 11 ft, after setting up, it is about 9.2ft. (flag size: about 7.9'x2.0' )
    L, pole total height is 15.1ft, after setting up, it is about 13ft.  (flag size: about 11.2'x2.3' )
    XL, pole total height is 18.4ft, after setting up, it is about 16ft. (flag size: about 13.5'x2.6' )


  • Delivery Time:    small order – 1 to 2 days, big order – 10 to 15 days

  • Shipping Time:  1 to 2 days to North America, Europe.
  •                                           2 to 3 days to Australia, New Zealand.
  •                                           3 to 5 days to other countries.

Tags: