Decorative House Flags Free Shipping

Decorative House Flags Free Shipping


custom flags   trade show table covers   Custom Tents   Beach Flags

Decorative House Flags Free Shipping   Decorative House Flags Free Shipping

 

Process recipe:

Of NaOH 2.0g / L

100% H2O2 20g / L,

Scouring agent 10g / L

Stabilizer 3 to 4 g / L

Accelerator 4 to 5 g / L Decorative House Flags Free Shipping

Two. Less alkali (or alkali) short steaming hot bath before the process of the treatment process for cotton, polyester, viscose and other fabric, more suitable for the pretreatment of viscose fiber and blended fabric. To 29.2tex × 36.4tex cotton yarn card, for example, the process and process parameters: Garden Flags Manufacturers

The working fluid of the two dip two rolled (at room temperature, rolling more than 90% ~ 95%) saturated steam steaming (90 ~ 95 , 10min) 50% concentration solution (50 ~ 80 ° C, 10min) hot washing alkaline washing hot water washing washing drying. Decorative House Flags Free Shipping

Process recipe:

            Of NaOH 6g / L

100% H2O2 for 10 ~ 20g / L,

Scouring agent 8 to 10g / L

Stabilizer 4-5g / L

Lactam oxygen bleaching activator 8 to 10 g / L Sports Team Feather Flags

3. Less alkali (or alkali) steaming pre-treatment process of the process pre-treatment of cotton poplin, cotton yarn drill, polyester line cards, cotton viscose yarn drill, can meet the semi-finished quality requirements. This process is very suitable for scouring and bleaching equipment.

One unit at room temperature dipping liquid steaming process, such as polyester khaki: R-stacking (90 ° C for more than 60min) hot water washing washing R in the 2 to 3 cell steaming box two units of conventional oxygen bleaching (or a unit 50% of the working fluid) steaming (100 ° C, 40min) hot water washing drying.

The process recipe is as follows:

Of NaOH 2g / L Wind Flags For Sale

100% H2O2 8 ~ 10g / L,

Scouring agent 10g / L

Stabilizer 4g / L

Lactam oxygen bleaching activator 5 g / L

(C) biological enzyme pre-treatment Cheap Custom Teardrop Flags

Biological enzyme in the dyeing and finishing process has demonstrated a broad and attractive prospect, it is mainly used for pre-processing of natural fiber fabrics, biological enzymes to remove the impurities on the fiber or fabric, for subsequent dyeing and finishing create the conditions. Biological enzyme desizing, Decorative House Flags Free Shipping scouring and biological enzyme pre-treatment technology, not only can avoid the use of alkaline agent and biological enzyme as a biocatalyst, nontoxic and harmless, with less and deal with milder conditions, the production generated by the Biodegradation , reducing pollution, saving energy.

A. Bio-enzyme desizing Advertising Flags For Businesses

 Fabrics of cotton, ramie, cotton blends, polyester linen blends biological enzyme desizing, mature experience, and achieved good results. Desizing amylase (alpha-amylase, beta-amylase), starch decomposition of water-soluble 1,4 – glucosidase, thereby stripping the fabric on the starch slurry or starch-based mixed slurry . The low temperature α-amylase, is ideal for stacking the continuous process, general requirements for water temperature 50 ~ 70 , pH value of about 6 to 7. The high temperature desizing enzyme that is genetically modified heat-resistant α-amylase, Decorative House Flags Free Shipping the temperature can reach 90 ~ 115 , steaming conditions within 1 ~ 3min rapid Backpack Banner Price  retreat in addition to the starch slurry suitable for continuous process, greatly improving the the Desizing efficiency and can remove the PVA in the mixed slurry and other chemical substances (PVA can also be used PVA decomposing enzyme desizing). Specific biological enzyme amylase on starch decomposition, no damage to the fiber; treated fabric feel treated with sodium hydroxide, Decorative House Flags Free Shipping a significant improvement; to simplify the process, reducing waste water discharge, the enzyme solution after discharge no effect on the environment and to meet the requirements of environmental protection.


Feather Flag & Pole & Spike & Base: As low as $49.00 to $59.00 !
Custom 3x5 Flags: As low as $6.00 to $13.50 !
Hand Flags: As low as $0.50 to $1.50 !
Car Flags: As low as $1.00 to $3.00 !
  All pricing based on quantity desired.
 
Unlimited Colors & No Set-up Fee's!

Minimum Order: 1

 custom printed flags
 
  • Color:  Any colors are available, Unlimited Colors & No Set-up Fee's!

  • Logo:  Any logos are available

  • Flags Material:   Knitted material / 100% Polyester / Nylon / Cotton / Satin and etc

  • Flagpole Material:  Aluminium alloy / Fiberglass / Wooden / Plastic

  • Normal Flag Size:   2'x3', 3'x5', 4'x6', 5'x8' and can be customized.
  • Hand Flag Size:  5"x8",  8"x12", 12"x18" and can be customized.
  • Car Flag Size:  8"x12", 12"x18" and can be customized.
  • Feather Flag/Teardrop Flag size:
  • S, pole total height is 8.5ft, after setting up, it is about 7ft.  (flag size: about  5.8'x1.3' ) 
    M, pole total height is 11 ft, after setting up, it is about 9.2ft. (flag size: about 7.9'x2.0' )
    L, pole total height is 15.1ft, after setting up, it is about 13ft.  (flag size: about 11.2'x2.3' )
    XL, pole total height is 18.4ft, after setting up, it is about 16ft. (flag size: about 13.5'x2.6' )


  • Delivery Time:    small order – 1 to 2 days, big order – 10 to 15 days

  • Shipping Time:  1 to 2 days to North America, Europe.
  •                                           2 to 3 days to Australia, New Zealand.
  •                                           3 to 5 days to other countries.

Tags: