Feather Flag Poles

Feather Flag Poles


custom flags   trade show table covers   Custom Tents   Beach Flags

feather flags   feather flags

 

Indoor flooring and outdoor wall decoration of PVC tiles, Feather Flag Poles PVC coating is in the thick mass of asbestos paper  mixed with a foaming agent, and then into the low-temperature drying tunnel to the formation of the PVC foam layer, and after cooling the winding and then number of color photo gravure inhibitors, such as by adding a 2 color ink to make this color part of the dent, the printed paper surface coating of transparent PVC surface protection layer after processing by the foaming furnace, ie the cohomology and pattern embossing embossed foam  products. As the  of building materials, with low processing costs, innovative features.

 

Foam  used in the production of packaging materials. Foam packaging   has the advantages of wear, pressure, water-resistant, bright color, breathable, moisture and other role, the look, feel worthy and comparable to natural leather.

 

With the continuous development of China's economic construction, the application of the foam  will be more widely used, the  of the new technology, new technologies will also continue to develop.

 

The foam  material. Foam  of the material in addition to  materials, paper, plastics, textiles, glass, leather, plywood, sheet metal, etc., foam   ink.

 

a. Microcystis foam ink. Microcystis foam ink is foaming microcapsules dispersed to link the compound, and add some additives made. The ink in the paper, textile and other substrates by the method of , after the low-temperature drying, baking heated to 120 ~ 140 , then expansion of the balloon in the ink after a few seconds, the formation of numerous small bubbles, the ink layer convex on.

 

Microcapsules foam ink formula:

 

60% of the acrylate copolymer

 

Microcapsules 20%

 

Urea 5%

 

Paste 10%

 

5% of the other ingredients

 

Microcapsules. Microcystis is the main ingredient for the manufacture of microcapsules foam ink. It differs from the blowing agent used in the manufacture of foam plastics industry. The principle is the monomer to polymer synthesis, made 5 to 80 microns in diameter, and tiny plastic sphere filled with a low boiling point solvents. Microcapsules after heating, the capsule of the low boiling point solvent is vapourised by heating the microcapsules diameter of 5 to 30 times. Acrylate copolymer. Acrylate copolymer type of acrylic acid A, B, D, and octyl. Under the general law of the carbon chain is the longer, the better the transparency of the copolymer, commonly used in carbon chain length to adjust the hardness. Is to use acrylic as a link to material in the microcapsules foam ink. This ester link material is oil, the aqueous non-ionic.

 

Urea. Urea has good moisture absorption, can promote the expansion and diffusion in the microcapsules is vapourised by heating, but also in the acidity and paste, to protect the substrate, stabilizing effect on the water and milk foam ink.

 

Feather Flags Feather Flags Wholesale Custom Feather Flags


Feather Flag & Pole & Spike & Base: As low as $49.00 to $59.00 !
Custom 3x5 Flags: As low as $6.00 to $13.50 !
Hand Flags: As low as $0.50 to $1.50 !
Car Flags: As low as $1.00 to $3.00 !
  All pricing based on quantity desired.
 
Unlimited Colors & No Set-up Fee's!

Minimum Order: 1

 custom printed flags
 
  • Color:  Any colors are available, Unlimited Colors & No Set-up Fee's!

  • Logo:  Any logos are available

  • Flags Material:   Knitted material / 100% Polyester / Nylon / Cotton / Satin and etc

  • Flagpole Material:  Aluminium alloy / Fiberglass / Wooden / Plastic

  • Normal Flag Size:   2'x3', 3'x5', 4'x6', 5'x8' and can be customized.
  • Hand Flag Size:  5"x8",  8"x12", 12"x18" and can be customized.
  • Car Flag Size:  8"x12", 12"x18" and can be customized.
  • Feather Flag/Teardrop Flag size:
  • S, pole total height is 8.5ft, after setting up, it is about 7ft.  (flag size: about  5.8'x1.3' ) 
    M, pole total height is 11 ft, after setting up, it is about 9.2ft. (flag size: about 7.9'x2.0' )
    L, pole total height is 15.1ft, after setting up, it is about 13ft.  (flag size: about 11.2'x2.3' )
    XL, pole total height is 18.4ft, after setting up, it is about 16ft. (flag size: about 13.5'x2.6' )


  • Delivery Time:    small order – 1 to 2 days, big order – 10 to 15 days

  • Shipping Time:  1 to 2 days to North America, Europe.
  •                                           2 to 3 days to Australia, New Zealand.
  •                                           3 to 5 days to other countries.

Tags: