Garden Flags And Banners

Garden Flags And Banners

Garden Flags And Banners

custom flags   trade show table covers   Custom Tents   Beach Flags

Garden Flags And Banners   Garden Flags And Banners


Concise method of visually scouring agent and formula,  Garden Flags And Banners refining the quality of quality mainly depends on performance, usage and process ratio of scouring agent.

Process instance:

Sunmorl WX-9 scouring the prescription:

   Sunmorl WX-9 (fatty alcohol polyoxyethylene ester) 1g / L

   Of NaOH 1g / L

The process of overflow washing machine: 120 ° C, 20min the scouring 80 ° C, 5 min hot water washing washing drying. Garden Flags And Banners

polyester / nylon new synthetic continuous refining processing prescriptions:

   Sandodean PC 0.5 ~ 2ml / L Discount Garden Flags Cheap

   Sandozin NA 0 ~ 0.5ml / L

   Sirrix the AK 0.5 ~ 2ml / L

   Of NaOH 2 ~ 3g / L

Temperature of 90 ~ 98 .

(2) pre-shaped process microfiber fabric shaped processing conditions and the conventional silk fabrics difference greater control in 180 ~ 190 , 30 ~ 60s, about 10% to overfeed, but modified polyester have significant difference. Control such as cationic dyeable polyester amorphous at Promotional Feather Flags 105 ~ 110 , Garden Flags And Banners 30 ~~ 60s, to overfeed 8% to 10%; polyester / nylon composite microfiber fabric is controlled at 170 ~ 175 , 30s. The presetting width control in less than 1.5% of the finished width. To pay attention to the amorphous condition should be based on the characteristics of different fabrics, the specifications, density, twist, type of material to determine the optimum process conditions.

(3) alkali reduction (or splitting) processing technology polyester / nylon composite fiber fabric using separated from the fiber, such as open-fiber alkali rate of 18% of the reference prescription: Garden Flags And Banners

    NaOH (98%) 3 ~ 5g / L

    Splitting accelerator CT 2-3g / L Personalized Advertising Flags

    Plasma spot removal to prevent the agent the ACR 0.5 to 2g / L Promotional Wind Flags

Processing in the 100 ~ 110 60min, then Supersoap containing NF 2 g / L, Discount Swooper Flags  90 in the soap in the handle 20min.

Microfiber reduction rate is low, generally 5% to 8% is appropriate. Alkali reduction rate, the impact of fiber strength caused by fiber damage. However, the reduction rate is too low, although fiber damage, but the splitting of the polyester / nylon composite fibers is not sufficient, therefore, usually in production, alkali reduction of the fiber pre-splitting, and then by mechanical rub the role of the fiber to further splitting. It should be noted, polyester / nylon composite fibers processed without splitting or staining and after processing will cause the fiber the greater the damage. Garden Flags And Banners

, Protein, fiber fabric pre-treatment

(A) pre-treatment of wool

    Cut the wool from the sheep, known as the original hair. Cheap Custom Teardrop Flags  In addition to the wool fiber in the raw wool, but also contain a large number of impurities, the percentage content of the wool fiber in the raw wool is called a net gross rate. Due to impurities in the raw wool, can not be directly used for wool production.

    Contains the type of the content and nature of impurities in the raw wool, with the varieties of sheep in pastoral areas and rearing conditions differ according to the impurity content is generally 40% to 50%, some even as high as 80%. The composition of impurities can be divided into natural impurities and additional impurities two types of natural impurities, Garden Flags And Banners mainly for the secretions of the sheep suet, sheep sweat and sheep droppings. Foreign impurities grass clippings, apple seeds, and sand.

Wool must undergo pre-treatment to textile processing. Handle the task of processing the wool, is to use a series of mechanical and chemical methods to remove various impurities in the raw wool to enable it to meet the requirements of wool production.

Feather Flag & Pole & Spike & Base: As low as $49.00 to $59.00 !
Custom 3x5 Flags: As low as $6.00 to $13.50 !
Hand Flags: As low as $0.50 to $1.50 !
Car Flags: As low as $1.00 to $3.00 !
  All pricing based on quantity desired.
Unlimited Colors & No Set-up Fee's!

Minimum Order: 1

 custom printed flags
  • Color:  Any colors are available, Unlimited Colors & No Set-up Fee's!

  • Logo:  Any logos are available

  • Flags Material:   Knitted material / 100% Polyester / Nylon / Cotton / Satin and etc

  • Flagpole Material:  Aluminium alloy / Fiberglass / Wooden / Plastic

  • Normal Flag Size:   2'x3', 3'x5', 4'x6', 5'x8' and can be customized.
  • Hand Flag Size:  5"x8",  8"x12", 12"x18" and can be customized.
  • Car Flag Size:  8"x12", 12"x18" and can be customized.
  • Feather Flag/Teardrop Flag size:
  • S, pole total height is 8.5ft, after setting up, it is about 7ft.  (flag size: about  5.8'x1.3' ) 
    M, pole total height is 11 ft, after setting up, it is about 9.2ft. (flag size: about 7.9'x2.0' )
    L, pole total height is 15.1ft, after setting up, it is about 13ft.  (flag size: about 11.2'x2.3' )
    XL, pole total height is 18.4ft, after setting up, it is about 16ft. (flag size: about 13.5'x2.6' )

  • Delivery Time:    small order – 1 to 2 days, big order – 10 to 15 days

  • Shipping Time:  1 to 2 days to North America, Europe.
  •                                           2 to 3 days to Australia, New Zealand.
  •                                           3 to 5 days to other countries.