Hand Held Flags

Hand Held Flags

Hand Held Flags

custom flags   trade show table covers   Custom Tents   Beach Flags

Hand Held Flags   Hand Held Flags


The water-soluble film with high solvent resistance, Hand Held Flags suitable for the system of broad-brush version. Reel loaded. Silkworm and more abundance of good and poor adhesion of the nylon and polyester, You can not use water-soluble ink. Not suitable for small to draw a line.


The paint film has a high water resistance, Hand Held Flags and reel loaded with silkworm good adhesion with less adhesion of the polyester, nylon. In addition to the water-soluble inks, other inks can not be used






Figure 2-105 cut engraved version of the method is step degree




Below describes the above several plates by hand-to-plate method.


a. Film paperboard production. The film paper is painted after the dissolution of shellac and rosin made of goose skin paper. Also coated in wax paper, but poor durability. The production version of the film paper as shown in Figure 2-106.


The bottom plate of the preparation. The end of the paper is thicker some of the finest paper in the drawing on paper with pencil. Best not to use paint pens and crayons, ballpoint pens, universal pen.


The bottom plate is painted in rainbow. Bottom plate and film paper close, Hand Held Flags need to be evenly coated on the bottom plate. With wax-based, not mineral wax. Wax thickness of the wax stick to bottom plate with your fingers. Coated with thick film paper is not easy to cut, but also easy connection dislocation. Fit. Paint film paper coated with some bottom plate for posted together, to prevent wrinkles and air bubbles can be used handkerchief or a piece of cloth from the center to the surrounding wipe real. Viscous effect due to the wax, so that the bottom plate and film paper one, the lines A on the bottom plate to paper from the film through to, and should immediately fit cutouts.


Dug shear. Along the the the contours of of the text and lines to use the burin, Hand Held Flags only will the paint film paper tailoring down; pay attention to Do not encounter degrees; the the knife of to open the blade of the in order to the surface; Yuan graphics to use to folder in the the Kompasu on the of the specially designed knife is tailoring; double line can be use the equipped with a two piece knife cutter; too small circle can be used to cut circular perforation.




Figure 2-106 film version of the production method




1 – 2 – film paper stickers on the bottom plate to the bottom plate on the wax surface of 3 – with a rag in the film paper smear film paper and the bottom plate fit


4 – dig with a knife to cut the text and pictorial part (only film paper cutouts, do not cut in the end version) 5 – only stripped of text and images (through the ink part) film paper


6 – in the film paper covers the Internet box online with iron iron – iron iron to remove the bottom plate




Production of multi-color plates with a bottom plate, the true nature of just cut down, should be put in the bottom plate on a film after waxing. This substrate is a thick wax paper. Tailoring after, and only stripped of there are the of the paint film paper of the text and the part of the of the drawing a line. Independent of strokes in a word, can be posted up another film paper.


Feather Flag & Pole & Spike & Base: As low as $49.00 to $59.00 !
Custom 3x5 Flags: As low as $6.00 to $13.50 !
Hand Flags: As low as $0.50 to $1.50 !
Car Flags: As low as $1.00 to $3.00 !
  All pricing based on quantity desired.
Unlimited Colors & No Set-up Fee's!

Minimum Order: 1

 custom printed flags
  • Color:  Any colors are available, Unlimited Colors & No Set-up Fee's!

  • Logo:  Any logos are available

  • Flags Material:   Knitted material / 100% Polyester / Nylon / Cotton / Satin and etc

  • Flagpole Material:  Aluminium alloy / Fiberglass / Wooden / Plastic

  • Normal Flag Size:   2'x3', 3'x5', 4'x6', 5'x8' and can be customized.
  • Hand Flag Size:  5"x8",  8"x12", 12"x18" and can be customized.
  • Car Flag Size:  8"x12", 12"x18" and can be customized.
  • Feather Flag/Teardrop Flag size:
  • S, pole total height is 8.5ft, after setting up, it is about 7ft.  (flag size: about  5.8'x1.3' ) 
    M, pole total height is 11 ft, after setting up, it is about 9.2ft. (flag size: about 7.9'x2.0' )
    L, pole total height is 15.1ft, after setting up, it is about 13ft.  (flag size: about 11.2'x2.3' )
    XL, pole total height is 18.4ft, after setting up, it is about 16ft. (flag size: about 13.5'x2.6' )

  • Delivery Time:    small order – 1 to 2 days, big order – 10 to 15 days

  • Shipping Time:  1 to 2 days to North America, Europe.
  •                                           2 to 3 days to Australia, New Zealand.
  •                                           3 to 5 days to other countries.