Order Custom Flags



Order Custom Flags

Order Custom Flags


custom flags   trade show table covers   Custom Tents   Beach Flags

Hand Waving Flags For Sale   Hand Waving Flags

Proofing: design a good text pattern made of transparent black and white picture is issued, Order Custom Flags close to the drug layer side in the sheet metal, exposure imaging with warm water, then dry baked, grilled straight to the chromium film showing tea red appropriate.

 

Corrosion: chromium film after baking into a corrosion-resistant layer. Order Custom Flags Ferric chloride solution (diluted to 30 Baume degrees as well). Of metal corrosion. The corrosion depth lies in the 0.04 ~ 0.05mm.

 

Dent in the corrosion of the metal pattern of text at the adhesive water: Desk Flags For Sale Corrosion of metal plates to be clean, versatile dry, apply a thin layer of rubber glue, then coated soft nitrocellulose lacquer.

 

Grinding paint, sticky: lacquered metal plate dry carefully with fine sandpaper grinding, grinding, metal panel text pattern was completely exposed to so far. Mini Flags Wholesale Taut panels placed in the metal plate, close to the metal plate affixed with a cotton stick banana water. Prior coated with a layer of rubber glue between the metal plate dent at the pattern and Nitrocellulose Liquor Thus, although the metal plate recess nitrocellulose lacquer design patterns at the melting posted in the last, Order Custom Flags but very easily separated from the metal plate.

 

plating plate. This is a plate-making method, a combination of photographic and electroplating Table Flags For Sale photography imaging, electroplating method, mode, the process: metal base surface treatment proofing coated photosensitive layer developing template plating Internet plating stripped of the metal version of the base, fixed on the box coating metal version.

 

Metal version of the base: 0.15 ~ 0.25mm thick stainless steel, copper or molybdenum foil. Plate to be done before the surface treatment, so that the version of the base surface of the electroless nickel layer, Order Custom Flags both plated uniform, they will be stripped. The processing of the molybdenum plate used sodium dichromate aqueous solution immersion, the stainless steel plate with 10% sodium hydroxide aqueous solution as the electrolytic fat processing.

 

Photographic film: You must be resistant to the performance of the plating solution available: PVA + dichromate, polyvinyl alcohol, cinnamic acids and rubber class sensitive adhesive.

 

Plating template: copy, Hand Waving Flags For Sale lithography of photosensitive template available sulfamate nickel solution, the high concentration of plating solution or sulfuric acid nickel solution plating 10 ~ 15μm thick nickel stencil.

 

Internet Plating: Nickel template obtained need to paste on the stainless steel, paste method stick method, electroplating bonding and pressure legitimate, one of the electroplating bonding is the most commonly used, Order Custom Flags that is put on the nickel template, and then plated in the above 5 ~ 10μm nickel layer, and finally stripped of the metal version of the base.

 

Metal template and photosensitive stencil etching and electroplating method were compared with the anti-Indian lines fresh sharp and thickness uniformity of the characteristics, the disadvantage is higher cost, less flexible.

 


Feather Flag & Pole & Spike & Base: As low as $49.00 to $59.00 !
Custom 3x5 Flags: As low as $6.00 to $13.50 !
Hand Flags: As low as $0.50 to $1.50 !
Car Flags: As low as $1.00 to $3.00 !
  All pricing based on quantity desired.
 
Unlimited Colors & No Set-up Fee's!

Minimum Order: 1

 custom printed flags
 
  • Color:  Any colors are available, Unlimited Colors & No Set-up Fee's!

  • Logo:  Any logos are available

  • Flags Material:   Knitted material / 100% Polyester / Nylon / Cotton / Satin and etc

  • Flagpole Material:  Aluminium alloy / Fiberglass / Wooden / Plastic

  • Normal Flag Size:   2'x3', 3'x5', 4'x6', 5'x8' and can be customized.
  • Hand Flag Size:  5"x8",  8"x12", 12"x18" and can be customized.
  • Car Flag Size:  8"x12", 12"x18" and can be customized.
  • Feather Flag/Teardrop Flag size:
  • S, pole total height is 8.5ft, after setting up, it is about 7ft.  (flag size: about  5.8'x1.3' ) 
    M, pole total height is 11 ft, after setting up, it is about 9.2ft. (flag size: about 7.9'x2.0' )
    L, pole total height is 15.1ft, after setting up, it is about 13ft.  (flag size: about 11.2'x2.3' )
    XL, pole total height is 18.4ft, after setting up, it is about 16ft. (flag size: about 13.5'x2.6' )


  • Delivery Time:    small order – 1 to 2 days, big order – 10 to 15 days

  • Shipping Time:  1 to 2 days to North America, Europe.
  •                                           2 to 3 days to Australia, New Zealand.
  •                                           3 to 5 days to other countries.

Tags: