Promotional Feather Flags

Promotional Feather Flags

Promotional Feather Flags

custom flags   trade show table covers   Custom Tents   Beach Flags

Promotional Feather Flags   Promotional Feather Flags


 (A) water quality requirements of the  and dyeing mill with steam, water the larger companies, pre-treatment process water consumption in the dyeing process the proportion of larger, Swooper Feather Flags WholesaleAccording to statistics,  and dyeing mill to produce the 1km cotton  and dyeing fabric, water consumption 20t, Promotional Feather Flagswhere the pre-treatment water accounts for about 50%. The water quality is not only a great influence on the pre-treatment and other processes product quality, but also affects the consumption of dyes, auxiliaries. Although the water quality can be improved by various methods, However, due to the  and dyeing mill water consumption, no matter which method to improve water quality, Swooper Feather Flags Wholesale will take up the equipment, facilities, and energy consumption, chemicals, resulting in increased costs. Thus the  and dyeing mill should be built in plenty of water and good water quality, and the location of the sewage discharge conditions. Promotional Feather Flags

 and dyeing water quality requirements as follows:

Transparency of> 30

Chroma 10 (platinum-cobalt degrees)

pH 6.5 ~ 8.5

Iron content 0.1mg / L

Manganese content of 0.1 mg / L, Swooper Flag Poles

Total hardness: dye, soap, water <0.36mg equivalent / L, and 3.6mg equivalent of the general washing water / L

(B) hard water softening method usually contains calcium, magnesium class of water is called hard water (content of calcium and magnesium salts in hard water hardness), low water content of calcium and magnesium salts is called soft water. Natural water softener, hard water, the distinction between standard is as follows:

Softener 0 ~ 57ppm

Slightly hard water 57 ~ l00ppm

Hard water 100 ~ 280 ppm

Extremely hard water> 280 ppm Custom Printed Teardrop Flags

Hard water calcium and magnesium salts are mostly unfavorable for textile dyeing and finishing, such as the role and the soap to form insoluble calcium and magnesium soap, precipitation in the fabric, in alkaline solution also generates insoluble scale attached to the previous processing equipment ( such as the inner wall of the slot machine, the valve guide roller), hinder the normal production. The water contains iron, manganese salts, the amount Promotional Feather Flags exceeding the prescribed limits, scouring the rust and oxidation of cotton fiber. Oxidant bleach, iron, manganese salts also played the role of the catalytic decomposition of bleach, crisp cotton fiber loss. Boiler water softener or scale precipitation firmly attached to the boiler wall, Printed Teardrop Flags  reducing the thermal conductivity of the boiler wall, will be more consumption of fuel; scale deposition can also cause a boiler explosion.

From natural water to remove calcium and magnesium salts, Beach Flags Poles known as the softening of hard water. There are several ways of softening may be needed to take the appropriate method. Generally used for pretreatment, dyeing,  after the washing of water, as long as clean water close to neutral, hardness 3.6mg equivalent / L (180ppm) below the water, such as river and city tap water to meet the requirements. Preparation of chemicals used for treatment of the solution, you should use a hardness of less than 0.36mg equivalent / L in soft water. Dryer radiator back to soft drinks, fine soft water used in the preparation of the solution is best. Such as inadequate supply or non-recovery equipment is also available chemical softening, Promotional Feather Flags to join in the water softener, then add the dyeing and finishing chemicals. Commonly used chemical water softeners are the following.

Also known as soda ash – lime now the representatives of calcium bicarbonate in the calcium salt, calcium and magnesium salts in hard water, hard water calcium bicarbonate is easy to dissolve in water, easily decomposed when heated to become calcium carbonate from the water to precipitate, Promotional Feather Flags temporarily hard. Beach Flags For Sale Hard water calcium sulfate does not precipitate in the water to boil, called permanent hard. Softening effect to the following chemical reaction on behalf of:

Ca (HCO3) 2 Ca (OH) 2 2CaCO3 2H20

CaS04 Na2CO3 CaCO3 Na2S04

Feather Flags Feather Flags Wholesale Custom Feather Flags

Feather Flag & Pole & Spike & Base: As low as $49.00 to $59.00 !
Custom 3x5 Flags: As low as $6.00 to $13.50 !
Hand Flags: As low as $0.50 to $1.50 !
Car Flags: As low as $1.00 to $3.00 !
  All pricing based on quantity desired.
Unlimited Colors & No Set-up Fee's!

Minimum Order: 1

 custom printed flags
  • Color:  Any colors are available, Unlimited Colors & No Set-up Fee's!

  • Logo:  Any logos are available

  • Flags Material:   Knitted material / 100% Polyester / Nylon / Cotton / Satin and etc

  • Flagpole Material:  Aluminium alloy / Fiberglass / Wooden / Plastic

  • Normal Flag Size:   2'x3', 3'x5', 4'x6', 5'x8' and can be customized.
  • Hand Flag Size:  5"x8",  8"x12", 12"x18" and can be customized.
  • Car Flag Size:  8"x12", 12"x18" and can be customized.
  • Feather Flag/Teardrop Flag size:
  • S, pole total height is 8.5ft, after setting up, it is about 7ft.  (flag size: about  5.8'x1.3' ) 
    M, pole total height is 11 ft, after setting up, it is about 9.2ft. (flag size: about 7.9'x2.0' )
    L, pole total height is 15.1ft, after setting up, it is about 13ft.  (flag size: about 11.2'x2.3' )
    XL, pole total height is 18.4ft, after setting up, it is about 16ft. (flag size: about 13.5'x2.6' )

  • Delivery Time:    small order – 1 to 2 days, big order – 10 to 15 days

  • Shipping Time:  1 to 2 days to North America, Europe.
  •                                           2 to 3 days to Australia, New Zealand.
  •                                           3 to 5 days to other countries.