Swooper Flag Poles

Swooper Flag Poles


custom flags   trade show table covers   Custom Tents   Beach Flags

Swooper Flag Poles   Swooper Flag Poles

 

Dyeing, it is necessary to control the dye temperature, pH, dye concentration and staining time, these factors affect the staining quality.

 

Aluminum, stained after washing, drying can be carried out following screen , Swooper Flag Polesdry, closed, dry, protective film, stamping text and graphics, high-light cutting process, Teardrop Flags Wholesale made of high light three-dimensional embossed aluminum signs.

 

8. Screen plating plaque. The plaque is a product of many signs factory production. Plaque-based metal material, it requires solemnly, obviously, highly decorated. Traditional metal plaque, especially in the brass to corrosion words, note the black lacquer square plaque is the most common. Swooper Flag Poles With the changing of people's aesthetic point of view, the gradual development of commodity economy, the quality of the plaque also has a new and different requirements. Swooper Flag Poles As the sign industry into a screen  technology, not only to promote the development of screen  technology, but also provide the technical means to develop new products to the sign industry. Advertising Flags For Businesses The new screen  legal system plating plaque signage product of the combination of electroplating, screen  process. Its basic approach is expressly graphics to screen  method, copper, covered with ink to protect non-graphical parts of the trees silver parts of the graphics system electroplating of copper, nickel, chromium, and then mechanical plastic to protect the processing.

 

The process. This process involves the treatment and painting of the electroplating, silk screen, copper plates and metal processing technology, so the more content, the general process is as follows: Teardrop Flags For Sale

 

Copper materials prepress processing review the production of printed version of the check dry plating pre-treatment electroless nickel layer Cleaning chrome plating layer dry cleaning retreat in addition to printed material Plastic welding frame spray varnish check factory

 

Main technical rules. Personalized Advertising Flags

 

a. Screen . Selection of more than 150 mesh nylon or polyester. By direct photographic plate method, the number of coating diazo light-sensitive glue more is better so that when the  to get a thick protective ink film. Proofing light engage 1000W metal halide lamps, lamp distance 45mm, exposure of about 5 minutes. Swooper Flag Poles The printed material is a plating resist ink.

 

and b. Pre-plated. Plating pre-treatment fluid formulation and process conditions are as follows

 

Of H2SO4 160ml / l;

 

Of H2O2 140ml / l;

 

CH3CH2OH 120ml / l;

 

CH3COOH 30ml / l.

 

, Room temperature;

 

0.5 to 1 minutes.

 

Weak corrosion activation solution:

 

Of H2SO4 10% solution

 

(c) Electroplated nickel. Electroless nickel formulation and process conditions are as follows

 

Addition of NiSO4 350g / l;

 

Of NaCl 20g / l;

 

Of H3BO3 40g / l;

 

Saccharin 0.8 ~ 1.0g / l

 

BE additives 0.6ml / l;

 

Dodecyl copper sulfate 0.05 to 0.1g / l.

 

of pH 4;

 

Temperature of 50 to 55 ;

 

Current density 5A/dm2;

 

Mixing the cathode mobile;

 

Time 30 to 40 minutes.

 

(d) Chrome plating layer. Chrome plating formulations and process conditions are as follows:

 

Of CrO3 Additive 300g / l;

 

Of H2SO4 2.7 to 30g / l;

 

Cr 2 ~ 5/gl.

 

Current density 25A/dm2; Cheap Teardrop Flags

 

Temperature of 50 to 55 ;

 

2 minutes.

 

e. Plastic welding frame.

 

Can be up and down folding, welding block about making the shape as shown in Figure 4-17.

 

Can hem, upper and lower welding block, as shown in Figure 4-18 shapes.

 

 

 

Figure 4-17 plaque welded frame form of

 

 

 

 

 

Figure 4-18 plaque welded frame in the form of 2

 

 

 Swooper Flag Poles

 

 

Figure 4-19 plaque welded frame in the form of three

 

 

 

Surrounded by folding or surrounded by welding block, as shown in Figure 4-19 shapes.

 

f. Spray varnish to protect the paint. The plaque surface is metal, paint graphics, so, according to supply and capacity, spray cover a variety of clear lacquer can. Transparency, Light, combined with a solid paint better.

 

9. Imitation metal etching, screen . Imitation of the  of metal etching products, visually metal etching effect.

 

To obtain these results, the substrate surface should have a mirror sheen. With transparent inks printed embossing ink coated on the substrate, the formation of the rough surface of the ground glass, with the combination of a strong contrast between the rough surface to make the  appear before the concave-shaped, and its mirror on the  of the convex effect. Contrast, the stronger the better imitation of etching. Concave-convex effect is proportional to the thickness of the ink coated. The ink containing the solid ingredients, if you use low-net destination plates, the effect will be even better.

 

Feather Flags Feather Flags Wholesale Custom Feather Flags


Feather Flag & Pole & Spike & Base: As low as $49.00 to $59.00 !
Custom 3x5 Flags: As low as $6.00 to $13.50 !
Hand Flags: As low as $0.50 to $1.50 !
Car Flags: As low as $1.00 to $3.00 !
  All pricing based on quantity desired.
 
Unlimited Colors & No Set-up Fee's!

Minimum Order: 1

 custom printed flags
 
  • Color:  Any colors are available, Unlimited Colors & No Set-up Fee's!

  • Logo:  Any logos are available

  • Flags Material:   Knitted material / 100% Polyester / Nylon / Cotton / Satin and etc

  • Flagpole Material:  Aluminium alloy / Fiberglass / Wooden / Plastic

  • Normal Flag Size:   2'x3', 3'x5', 4'x6', 5'x8' and can be customized.
  • Hand Flag Size:  5"x8",  8"x12", 12"x18" and can be customized.
  • Car Flag Size:  8"x12", 12"x18" and can be customized.
  • Feather Flag/Teardrop Flag size:
  • S, pole total height is 8.5ft, after setting up, it is about 7ft.  (flag size: about  5.8'x1.3' ) 
    M, pole total height is 11 ft, after setting up, it is about 9.2ft. (flag size: about 7.9'x2.0' )
    L, pole total height is 15.1ft, after setting up, it is about 13ft.  (flag size: about 11.2'x2.3' )
    XL, pole total height is 18.4ft, after setting up, it is about 16ft. (flag size: about 13.5'x2.6' )


  • Delivery Time:    small order – 1 to 2 days, big order – 10 to 15 days

  • Shipping Time:  1 to 2 days to North America, Europe.
  •                                           2 to 3 days to Australia, New Zealand.
  •                                           3 to 5 days to other countries.

Tags: